Specification	Value
	Supply Voltage:	24 to 240 VAC/VDC
	Supply Fusing:	Supply to be fused at 500mA maximum
	Switching Capacity:	50mA maximum
	Saturation Voltage:	5.5 Volts maximum (output on)
	Leakage Current:	1.0 mA maximum (output off)
	Ambient Temperature:	5°F (-15°C) to +122°F (+50°C)
	Output State:	FET
	Sensing Range:	6 mm (15/64”) maximum on ferrous metal at 77°F (25°C)
	Input Pulse Range:	20 to 3,600 pulses per minute (PPM) maximum
	Start-Up Delay:	4 seconds
	Trip Point:	zero speed
	Enclosure:	Nylon - ISO threaded 18 mm by 1.0 mm pitch
	Relative Humidity:	90% RH
	LED Indicators:	Blue - Target Sensed, Green - Rotation Detected
	Connections:	2 wire, 3m long cable.
	Protection:	IP66

The M1003 Stopswitch is a simple inductive shaft speed monitoring device. The self-contained unit, which signals when the shaft has stopped rotating. It can be used for process control, motion detection and stopped shaft indication. An inductive sensing device located in the nose of the M100 enclosure will detect a metal target. This target can be an existing bolt head or device attached to a shaft. The M1003 Stopswitch requires no calibration and provides an output when the shaft has stopped rotating.

• Delivery of spare parts and industrial equipment throughout the USA by Fedex transport company.
• Flexible payment system accepting bank transfers, MasterCard, VISA, PayPall, App Pay, Google Pay.
• Directly from stock and on order.