Supply	24 VDC (TS1V4AI) / 24 VDC (TS1V4AI/x) / 12 VDC (TS1V3AI)
Power Consumption	50 mA (TS1V4AI) / 50 mA (TS1V4AI/x) / 60 mA (TS1V3AI)
LED Indication	Red LED indicates unit is powered up and relay is energized
Sensing Force	Factory set to 8 lb. (3.6 Kg) approximately
Output	Voltage free changeover relay contact rated at 5A - 250 VAC, non-inductive
Construction	Hardened stainless steel (face) and seamless steel with epoxy paint (body)
Cable	3 m (9 ft. long)- 6 x 22 AWG Conductors
Weight	1.4 Kg (3 lbs.)
Protection	NEMA 4X, IP66

The Touchswitch™ is an electronic limit switch. When a belt misaligns or a pulley moves over and contacts the sensor, the built in solid-state electronic circuitry detects the lateral force of the belt or pulley and activates a voltage free relay contact. This relay contact is used to immediately alarm and shutdown the machine. The face of the sensor is made from hardened stainless steel, so that there is virtually no wear when a belt contacts it. The sensor is not affected by dust or material build up and will still work when completely covered by material. Sensors are normally installed in pairs on opposite sides of the machine. Usually a pair of sensors at each pulley is used, but additional pairs can be installed as required. An external test knob allows for quick and simple sensor / system testing.

• Delivery of spare parts and industrial equipment throughout the USA by Fedex transport company.
• Flexible payment system accepting bank transfers, MasterCard, VISA, PayPall, App Pay, Google Pay.
• Directly from stock and on order.