TECHNICAL FEATURES AND REGULATIONS SET POINT (SP) Set point regulation (trimmer P2 left top). FULL SCALE (RANGES) Trimmer P1 to be set in correspondence of the required range (Fig. 2). VISUALIZATIONS ON GREEN LED supply on OFF RED LED internal relay changes over. RESET: automatic. SETTING Supply the load with set point to "zero" and turn the trimmer upwards until the red led lights on; this is the set point value. Slightly lower the regulation. In order to avoid the alarm when the thermoregulator is off, it is suggested to supply the device in parallel with the load. INSTALLATION Electric wirings as per fig. 1. (Wiring to an electrical board with a differential relay and a sectionalizing switch). The length of every wiring must be less than 30m. INPUT The wire carrying the current must pass through the CT hole (Ø 10 mm). OUTPUT: 5A - 230 Vac - resistive load. Condition of the contacts: TAB B.

FUNCTION The device controls the current of a load. The wire carrying the current must pass through the built-in current transformer. If the current goes below the set point, the device goes in alarm after an approximate delay of 2 secs, and the output relay goes on.

• Delivery of spare parts and industrial equipment throughout the USA by Fedex transport company.
• Flexible payment system accepting bank transfers, MasterCard, VISA, PayPall, App Pay, Google Pay.
• Directly from stock and on order.