INPUT: pin 1-5 (+ on pin 1). Permanent overload 200%. Input resistance: 6 kW /V. OUTPUTS: (max error 1%) Current: ± 20mA (4-20mA not available) 250W. max - pin 11-12 (current outgoing from pin 11). Voltage: ±10Vdc - pin 13-14 (+ on pin 13). Load higher than 10 kW. The outputs are positive when the input signal connected to pin 1 is positive. VISUALIZATIONS ON GREEN LED: supply on in the input section. ON YELLOW LED: supply on in the output section. GALVANIC SEPARATION The supplies of the input and output section are given by two transformers. The two sections are optically separated by a linear coupler, without frequency conversion (fig. 2). Insulation: 4000 Vac between input and output for 1 minute. RESPONSE TIME: 10÷90% less than 20 micro sec. INSTALLATION: See fig.2. (Wiring to an electrical board with a differential relay and a sectionalizing switch). The length of every wiring must be less than 30m. RANGES: see TAB.A. SIZE: 45x75x115 mm for DIN rail. WORKING TEMPERATURE: 0÷70°C SUPPLY: 4VA - 50-60Hz Tolerance: ±10% 7-8 : 115 Vac or 230 Vac or 24Vac WEIGHT: 0,300 kg COLOUR: grey

FUNCTION The device measures the direct voltage at the input pins. Fig.1 shows the relation between the input voltage and the current and voltage outputs

• Delivery of spare parts and industrial equipment throughout the USA by Fedex transport company.
• Flexible payment system accepting bank transfers, MasterCard, VISA, PayPall, App Pay, Google Pay.
• Directly from stock and on order.