TECHNICAL FEATURES AND REGULATIONS OUTPUT PROGRAMMER: DS The dip switch programmer activates the number of the requested outputs according to the models. Set in ON position only the slider correspondent to the last load (the load number is printed on the circuit board and not on the dip-switch). Example: 7 loads: select the model GC 09-8 and activate (ON) only the slider n. 1 of the equipped dip-switch. I (PULSE) Regulation of the pulse time (showed by red leds) from 10 ms to 1 second (special pulse times on request). P (PAUSE) Regulation of the pause time from 1 to 60 seconds (special pause times on request). VISUALIZATIONS PAUSE GREEN LED: on during the pause. 1÷12: RED LEDS : individually lighted on during the activation of each output SETTING By removing the panel (unscrew the two screws), the regulations and the terminal boards are available. NPUT start: pin 19-20 By closing a free voltage contact, the device starts from the first load. The opening of the contact stops the load sequence; by closing again the contact the sequence starts from the point where it stopped. OUTPUTS (see fig. 1,2) PIN: 1 ÷ 12 connection of one phase of each load. PIN: C (COMMON) connection for the “common” of all the loads. Fix the panel. Make the regulations of I and P, as requested, with device switched on. DEVICE SUPPLY pin 16-18 2VA – 50÷60 Hz • 230Vac or 115Vac or 24Vac Tolerance ±10% protected by internal fuse “F1 (SUPPLY)”; • or 24Vdc con + on pin 16, only in case that also the loads are in DC current (fig 3) Case: in plastic with transparent cover, IP 56, with double insulation. The drilling of the plastic case for the passage of power supply and loads cables (double insulated cables) is the installer’s responsibility. After drilling the IP56 degree is obtained only using the specified accessories supplied by the box’s manufacturer. Size: 160x118x75 mm Working temperature: 0÷60°C Weight: kg 0,600 - Colour: grigio

FUNCTION The device energizes the outputs in sequence for the period I (PULSE). Between the excitation of two outputs the period P (PAUSE) takes place. After the last output, the device GC 09 restarts the sequence from the first output. USE It is used for the cyclic command of several loads, such as electrovalves for filters, contactors, relays, lamps, for the gradual connection of loads etc

• Delivery of spare parts and industrial equipment throughout the USA by Fedex transport company.
• Flexible payment system accepting bank transfers, MasterCard, VISA, PayPall, App Pay, Google Pay.
• Directly from stock and on order.