RANGES: A: FS = 5 Vac INPUT: pin 16-13 - 660 Vac max Ring 1MW. OUTPUT 5A(NO) 3A(NC)-230 Vac resistive load Relay A 5 - 4 NC 5 - 6 NO Relay B 2 - 1 NC 2 - 3 NO SUPPLY 2 VA 50-60Hz ±10% 7-8 : 230 Vac or 115 Vac or 24 Vac DIMENSIONS 45x75x110 mm - DIN rail 43880 with transparent cover fitted to be lead sealed. NORYL UL94Vø – Selfextinguishing. Accessory on request: M 48B transparent cover, fitted for tight closure. WORKING TEMPERATURE: 0÷70°C WEIGHT: 0,300kg COLOUR: grey

FUNCTION The device detects the voltage between two phases of the motor and it gives out a signal when this voltage goes below the SET POINT value. USE The application of V1 06N as stopped shaft detector is based on the principle according to which an asynchronous three-phase motor works as generator in the deceleration phase. As a matter of fact as soon as the supply is cut off, the motor slows down, but at the motor terminals it comes out a voltage proportional to the motor speed; such voltage is dependent on the size of the motor and on the induction remained inside the magnetic circuit of the motor itself. V1-06N can be connected according to fig. 1. The input 13-16 is permanently connected to two phases of the motor. As long as the voltage is higher than the SET POINT, the internal relay is OFF; when the voltage goes below the SET POINT, the relay goes ON (the condition “stopped motor” is detected in “safety” condition).

• Delivery of spare parts and industrial equipment throughout the USA by Fedex transport company.
• Flexible payment system accepting bank transfers, MasterCard, VISA, PayPall, App Pay, Google Pay.
• Directly from stock and on order.