ANALOG VOLTAGE OUTPUT Voltage 0-10Vdc is available between the pin 7(+) and 8 (0V) - max 1mA. Such voltage is proportional to the instant active power measured by E 492N, and can be displayed by DC VOLTMETER DVD 08 as “100” or other value (fig. 9). The analog output is present when the input current overcomes at least 1/20 of the current full scale selected by K. POSITIVE SAFETY Each output relay - change over contact - associated to each set point, is normally ON and it turns OFF in case of alarm. INPUT Voltage pins : 10, 12, 14 Input Resistance = 800 kΩ See REMARK 3. Current pins : 15,16. No specific order to be followed. The maximum threephase voltage is 415 Vac. For higher voltages, it is requested the application of: M 08 : Threephase drop resistances + CT for insulation. OUTPUT RELAY 5A(NO) 3A(NC)-230 Vac resistive load. SUPPLY: (single voltage) 2,5VA 50-60 Hz -tolerance ±10% 19-20: 115Vac or 230 Vac or 24 Vac or 48 Vac. DIMENSIONS: 105x90x75 mm “modular” for rail DIN flush mounting. Accessory on request: M48E transparent protection, fitted for tight closure. WORKING TEMPERATURE: 0÷70°C WEIGHT: Kg 0,550 COLOUR: grey

FUNCTION The wattmetric relay E 492N measures the voltage (V) and the current in the line (I), besides it computes the cos and the ACTIVE POWER as product of: W = 1,73 V I cos USE The electric motor is the most common load to be controlled by an active power relay. The active power supplied to the motor gives the direct information of the instant load of the motor itself. Such information is more accurate than the one given by the current value. As a matter of fact the cos variations may change the power value without affecting the current value

• Delivery of spare parts and industrial equipment throughout the USA by Fedex transport company.
• Flexible payment system accepting bank transfers, MasterCard, VISA, PayPall, App Pay, Google Pay.
• Directly from stock and on order.