• Safety switch with integrated evaluation electronics
• No series connection
• Short circuit monitoring
• 2 safety outputs (semiconductor outputs)
• Door hinge right
• Category 4/PL e according to EN ISO 13849-1
• Connection cable PUR, 0.2 m, plug connector M12, 5-core, pin 5 not used
• Unicode
• Two safety screws M4x14 included

Short circuit monitoring The switch generates its own clock signal on the output cables OA/OB. Pay attention to this aspect when connecting to control systems and relays. Each actuator is unique. The switch detects only taught-in actuators. Additional actuators can be taught in. Only the last actuator taught in is detected. Category according to EN 13849-1 Due to two redundantly designed semiconductor outputs (safety outputs) with internal monitoring suitable for:

• Category 4/PL e according to EN 13849-1

Important: To achieve the stated category in accordance with EN ISO 13849-1, both safety outputs (OA and OB) must be evaluated. LED indicator

STATE	Status LED
DIA	Diagnostics LED

Approach directions Typical operating distance (Actuator CES-A-BLN... in conjunction with safety switch CES-AP-C.2-... in case of mounting on plastic) For a side approach direction for the actuator and safety switch, a minimum distance of s = 6 mm must be maintained so that the operating distance of the side lobes is not entered. Attention: The operating distance may vary depending on the background material and installation situation. Connector assignment

Plug connector (view of connection side)	Pin	Designation	Function	Conductor coloring of connection cable
	1	UB	Power supply, DC 24 V	BN
2	OA	Safety output, channel 1	WH
3	0V	Ground, DC 0 V	BU
4	OB	Safety output, channel 2	BK
5	-	n.c.	GY

Housing material	Plastic, PBT
Weight
Net	0,06 kg
Ambient temperature
Cable static	-25 ... 65 °C
Cable dynamic	-5 ... 65 °C
Degree of protection	IP67
Resilience to vibration	In acc. with EN IEC 60947-5-2
Mounting method	Surface mounting on metal
Mounting distance
Between 2 switches or 2 actuators	min.400 mm
Installation orientation	Any
Tightening torque
Fixing screws	max.1 Nm
Ready delay	0,5 s
Switching frequency	max.1 Hz
Connection	Connection cable PUR 0.2m with plug connector M12 5-pin, pin 5 not used
Bending radius
static	5 x cable diameter
Dynamic	10 x cable diameter

Electrical connection ratings

Operating voltage DC
UB	24 V DC 15% ... 15% Regulated, residual ripple < 5 %
Current consumption	max.30 mA
Utilization category according to EN 60947-5-2
DC-13	24V 150mA
Fusing
External (operating voltage)	0,25 ... 8 A
Rated insulation voltage Ui	75 V
Rated impulse withstand voltage Uimp	max.1,5 kV
EMC protection requirements	In acc. with EN IEC 60947-5-3
Degree of contamination (external, according to EN 60947-1)	3
Switch-on time
Safety outputs	max.300 ms
Safety class	III
Risk time according to EN 60947-5-3	max.260 ms
	Safety outputs OA/OB
Test pulses	max.0,3 ms
Test-pulse interval	min.100 ms
Type of output	Semiconductor outputs, p-switching, short circuit-proof
Switching current
per safety output	1 ... 150 mA
Output voltage
HIGH U(OA) / U(OB)	UB-1,5V ... UB V DC
LOW U(OA) / U(OB)	0 ... 1 V DC
Rated conditional short-circuit current	100 A
Off-state current Ir	max.0,25 mA
Discrepancy time	max.10 ms

Work area

Repeat accuracy R

? 10

Other

For the approval according to UL the following applies

Operation only with UL class 2 power supply, or equivalent measures

Reliability values according to EN ISO 13849-1

	Monitoring of the safety guard position
Category	4
Performance Level	PL e
PFHD	1.8 x 10-9
Mission time	20

In combination with Actuator CES-A-BLN-R2-100776, CES-A-BLN-U2-103450, CES-A-BLN-L2-104510, CES-A-BLN-U2-112710Operating distance

Switch-on distance	15 mm
Assured switch-off distance Sar
In y direction	max.60 mm
In x/z direction	max.40 mm
Assured operating distance Sao	min.10 mm
Switching hysteresis	min.1 mm

In combination with Actuator CES-A-BDN-06-104730Operating distance

Switch-on distance	19 mm
Assured switch-off distance Sar
In y direction	max.60 mm
In x/z direction	max.40 mm
Assured operating distance Sao	min.14 mm
Switching hysteresis	min.1 mm

The 111748 industrial spare part is crafted with precision to ensure your machinery operates at peak efficiency. Engineered for industrial products in demanding environments, it guarantees reduced downtime and increased productivity. 111748 components are built to withstand the toughest industrial conditions, making them essential for keeping your operations in the USA running smoothly.

Euchner offers a wide selection of industrial spare parts for different applications. Whether you’re performing maintenance or replacing worn-out parts, 111748 provides long-lasting, reliable solutions. Order your 111748 spare part today for fast delivery across the USA and keep your equipment performing at its best.

For industrial components and spare parts, trust Euchner to supply top-tier products that enhance the lifespan and efficiency of your machinery.

• Delivery of spare parts and industrial equipment throughout the USA by Fedex transport company.
• Flexible payment system accepting bank transfers, MasterCard, VISA, PayPall, App Pay, Google Pay.
• Directly from stock and on order.