• Guard locking with guard lock monitoring
• Can be connected in series with other AR devices (e.g. CES-AR and CET-AR)
• Emergency stop according to ISO 13850
• 1 pushbuttons (illuminated)
• With lens set, 6 pcs.
• With cable entry
• Unicode

Guard locking type

MGB-L1...

The locking arm is held in the locked position by spring force and is unlocked by solenoid force (closed-circuit current principle, mechanically locked).

Door hingeA mechanical door stop is permanently integrated into the evaluation module of the MGB. A marking on the stop makes adjustment easier. LED indicatorThe LED indicator indicates all important system and status information. Monitoring outputs

OD	ON when the door is closed
OT	Bolt tongue inserted in the evaluation module
OL	Guard locking solenoid in locked position
OI	Diagnostics, there is a fault

Emergency stop device

S1	2 positively driven NC contacts and 1 NO contact (e.g. monitoring contact), emergency stop with turn-to-reset, not illuminated

Pushbutton

S2	1 NO contact, illuminated

Lens setThe color of the pushbutton can be selected using the lens set included (5 colors). Item no.: 120344 (see Accessories) Dimension drawing Cable entry MGB: The MGB-System in use MGB: MGB Impact test MGB: Mounting left door, with escape release Mounting left door, without escape release Mounting right door, without escape release MGB: Changing single wiring (AP) to series wiring (AR) MGB: Deactivating guard lock monitor MGB: Activating guard lock monitor MGB: Activating release monitoring MGB: Change color-lens push button Dimension drawingCable entry Technical dataApprovals Mechanical values and environment

Housing material	Reinforced plastic, die-cast zinc nickel-plated, stainless steel
Weight
Net	0,75 kg
Ambient temperature
At UB = 24V DC	-20 ... 55 °C
Degree of protection	IP65
Mechanical life	1 x 106
In case of use as door stop, and 1 Joule impact energy	0,1 x 106
Installation orientation	Door hinge DIN right
Switching frequency	0,25 Hz
Connection	Cable entries M20x1.5
Guard locking principle	Closed-circuit current principle
Locking force FZh	2000 N

Electrical connection ratings

Utilization category according to EN 60947-5-2
DC-13	24V 200mA
Rated insulation voltage Ui	30 V
Rated impulse withstand voltage Uimp	1,5 kV
Degree of contamination (external, according to EN 60947-1)	3
Connection cross-section
(Rigid/flexible)	0,13 ... 1,5 mm? (AWG 24 ... AWG 16)
(Rigid/flexible) with cable end sleeve according to DIN 46 228/1	0,25 ... 1,5 mm?
(Rigid/flexible) with cable end sleeve with collar according to DIN 46 228/1	0,25 ... 0,75 mm?
Safety class	III
Discrepancy time
Between FO1A and FO1B	max.10 ms
Risk time according to EN 60947-5-3	max.350 ms
Transponder coding	Unicode
	Controls and indicators
Switching voltage	UA V
Switching current	1 ... 10 mA
Breaking capacity	max.0,25 W
Power supply LED	24 V DC
	Power supply UB
Operating voltage DC
UB	24 V DC -15% ... 10%
Current consumption
IUB	max.80 mA
	Power supply UA
Operating voltage DC
UA	24 V DC -15% ... 10%
Current consumption
IUA	max.375 mA
	Safety outputs FO1A, FO1B
Test pulses	max.1 ms
Test-pulse interval	min.100 ms
Type of output	Semiconductor outputs, p-switching, short circuit-proof
Output voltage
UFO1A /UFO1B HIGH	UB-2V ... UB V DC
UFO1A /UFO1B LOW	0 ... 1 V DC
Output current
Per safety output FO1A / FO1B	1 ... 200 mA
	Monitoring outputs OD, OT, OL, OI
Type of output	Semiconductor outputs, p-switching, short circuit-proof
Output voltage	UA-2V ... UA V DC
Output current	max.50 mA
	Emergency stop
Switching voltage	5 ... 24 V
Switching current	1 ... 100 mA
Breaking capacity	max.0,25 W
Power supply LED	24 V DC
	Solenoid control input IMP1, IMP2, IMM
Test pulses	max.5 ms
Test-pulse interval	min.100 ms

Controls and indicators

Belegungsschema	L1
	Position 1
Ausfuhrung	Emergency stop
Einlegeschild
Extras	With auxiliary contact
Farbe
Schaltelement	2 pos. driven NC + 1NO
	Position 2
Ausfuhrung	Illuminated push buttons
Einlegeschild
Extras
Farbe
Schaltelement	1NO

Other

Additional feature	Incl. cover set ID. No. 120344
Product version number	V3.0.3

Reliability values according to EN ISO 13849-1

	Monitoring of guard locking and the safety guard position
Category	4
Performance Level	PL e
PFHD	3.7 x 10-9
	Control of the guard locking
Category	4
Performance Level	PL e
PFHD	2.8 x 10-9
	Emergency stop
B10D
Emergency stop	0,065 x 106
Mission time	20 y

The 121130 industrial spare part is crafted with precision to ensure your machinery operates at peak efficiency. Engineered for industrial products in demanding environments, it guarantees reduced downtime and increased productivity. 121130 components are built to withstand the toughest industrial conditions, making them essential for keeping your operations in the USA running smoothly.

Euchner offers a wide selection of industrial spare parts for different applications. Whether you’re performing maintenance or replacing worn-out parts, 121130 provides long-lasting, reliable solutions. Order your 121130 spare part today for fast delivery across the USA and keep your equipment performing at its best.

For industrial components and spare parts, trust Euchner to supply top-tier products that enhance the lifespan and efficiency of your machinery.

• Delivery of spare parts and industrial equipment throughout the USA by Fedex transport company.
• Flexible payment system accepting bank transfers, MasterCard, VISA, PayPall, App Pay, Google Pay.
• Directly from stock and on order.