Product Attribute	Attribute Value	Search
Actuation Force	6.8 Kg (Push⁄Pull) (Shaft Axial)
Contact Resistance	10 Kiloohms (Pull-up)
Current Rating	30 mA
Material	Molded Thermoplastic (Housing)
Maximum Operating Temperature	65 C
Minimum Operating Temperature	-40 C
Mounting Torque	0.011 Nm (Max.) (Operating)
Mounting Type	Chassis Mount
Operating Temperature, Maximum	65 C
Operating Temperature, Minimum	-40 C
Output Type	Optical
Series	600 Series
Standards	MIL-STD-202
Supply Voltage	5 V
Technology	Optical
Type	Incremental
Voltage Rating	5 VDC

600 Series Encoder, 30 Ma Current Rating, 5 VDC (Nom.) Voltage Rating The series 600 controls are manually operated, rotary, optical encoders that output two square waves in quadrature at a rate of 128 pulses per channel per revolution as a standard with other resolutions down to 60 pulses available. The outputs are TTL compatible. The variation in this series is in the terminal configuration: either pin leads or cable leads. Specifications. Input Power: 5 volts DC ±5% @ 30 MA max. plus external requirements. Output Rate 128 pulses/revolution per channel-standard; Other pulses/revolution between 60 and 128 are available. Channels: Two separate output channels in quadrature, 90° ±45°. Output Voltage: High level voltage — 2.4 volts min. with 10 KΩ load to ground; Low level voltage — 0.4 volt max. Operating Temp: -20°C to +65°. Vibration: 10 to 2000 Hz, 15 G peck; MIL-STD-202 method 204 test C. Shock: 100 G @ 6 ms MIL-STD-202 method 213 condition 1. Mechanical Characteristics. Shaft Rotation: Continuous in either direction. Operating Speed: 300 rpm max. Rotational Life: 10 million revolutions. Rotational Torque: 1.5 ozs. in max. Shaft: 1/4 diameter standard, stainless steel. Bushing: 3/8 diameter standard, brass, nickel plated. Terminals: P/C Type — 0.25 by 0.12 thick brass, gold plated to facilitate soldering. Cable Type — Four lead ribbon cables, color-coded, with 0.050 spacing, 28 AWG stranded copper wire, 0.39 diameter. Strength: Terminals withstand 2 Lbs. push and pull and a 90° bend. Mounting Hardware (not supplied): For 3/8 bushing, use hex mounting nut 3/8 ? 32 thread, 1/2 across flats, 3/32 thick; internal tooth lockwasher 11/16 O.D. by 0.022 thick. Seals: Mounting seal and shaft seal available. Controls are not sealed for board washing. Weight: P/C type or cable type. 1 in. FMS shaft and 3/8 bushing-0.046 Lb. (21 G). Loc. Pin (Not Standard): Single pin located 17/32 from center can be supplied.

Optical Incremental Encoders

Analog to Digital Converters

TTL Compatible All Models

Only 1.125" Diameter ? 0.484" Deep

• Delivery of spare parts and industrial equipment throughout the USA by Fedex transport company.
• Flexible payment system accepting bank transfers, MasterCard, VISA, PayPall, App Pay, Google Pay.
• Directly from stock and on order.