Max. Range mm	1500
Min. Range mm	150
Beam angle(°)	10
Carrier frequency	220 kHz
Temperature compensat.	Yes
Interface	RS485
Sensitivity adjustment	Potentiometer
Analogue output	0-10V
Repeatability	2 mm / 0.4%
Response time (ms)	100
Linearity	0.5% / 3mm
Output adjustment	Prog.
Switching outputs	2 NO/ NC ; PNP
Hysteresis	Prog.
Switching frequency	Prog. 5-30 Hz
Output circuit	Open collector 100 mA
Set point adjustment	Prog.
Information output	HEX/BCD
Alignment LED	Yes
Control inputs	Hold/Synchronisation
Temperature range	-15-+70 °C
Storage temperature range	-25-+85 °C
Supply voltage	19-30 V DC
Current consumption without load	<=25 mA
Reverse polarity	Yes
Voltage spikes on supply and output lines	Yes
Short circuited switching output	Yes
Sealing IP	IP 65
Housing	Stainless steel

The series P42-T/A sensors, all of which have an analogue 0-10V / 4-20mA output and two switching outputs, are programmed via an RS232 or RS485 interface. Characteristic curve, dead zone, set points, sensitivity, electronic filters, response time, and sensor addresses are optimally adapted to the measuring task. For communication with the computer, no special adapter is required, a direct access to the interface on the sensor is possible.

• Delivery of spare parts and industrial equipment throughout the USA by Fedex transport company.
• Flexible payment system accepting bank transfers, MasterCard, VISA, PayPall, App Pay, Google Pay.
• Directly from stock and on order.